Earthing bracket with two protective-earth spring contacts made of copper alloy — stamped and formed part for SCHUKO socket outlets, installation technology · Biegema

Electronics

Earthing bracket / protective-earth contact for SCHUKO socket outlets

One-piece earthing bracket as a stamped and formed part for earthed (SCHUKO) socket outlets. The two outward-curved spring ends form the lateral protective-earth contacts that engage the plug's earthing strips on insertion; the central hole serves for the protective-earth conductor termination and for mounting in the socket insert.

Material: Copper alloy (bronze/brass) · 1.2 mm

Production

Can be produced on these machines

FMS-Q 250 RS

Power with high performance.

CYCLE 400 T/min
PUNCH 250 kN
BEND 30/50 kN

Go to machine →

FMS-Q 350 RS

Kompakt und kraftvoll

CYCLE 250 T/min
PUNCH 350 kN
BEND 40/60 kN

Go to machine →

FAQ

Häufige Fragen zur Fertigung: Earthing bracket / protective-earth contact for SCHUKO socket outlets

You can produce Earthing bracket / protective-earth contact for SCHUKO socket outlets on the FMS-Q 250 RS and FMS-Q 350 RS. The FMS-Q 250 RS works with 250 kN punching force, strip material up to 60 mm width, wire up to 6 mm. At up to 400 parts per minute, the machine is designed for series production — finished parts come straight off the machine.

The radial design positions the bending slides freely through 360° around the central bending core — ideal for parts like Earthing bracket with multiple bends in different directions. Tool changes take less than 30 minutes, so even smaller batches are economical.

Copper alloy (bronze/brass) (1.2 mm) runs through the punch-bending machine as strip or wire stock in a progressive process: punching, bending, and inspection happen in one pass. Instead of buying parts from suppliers, you produce them in-house at significantly lower unit costs from medium quantities upwards — Biegema configures the machine specifically for your part.